Skip to main content

Product information "UNIsafety Pack 2600"

The light option. Safety glasses with a large wide-view lens which seals off the eye area comfortably and generously. The temples, which are at an angle adjustable, can be perfectly adapted to the head size. While the soft rubber temple ends prevent it from slipping.
Declaration of conformity for UNIsafety Pack 2600 - 0439 5555 02.1

We declare bindingly that the safety glasses comply with the relevant harmonization legislation of Regulation (EU) 2016/425 as well as the respective safety glasses standards and have been certified accordingly by a notified body as part of a type test.

Declaration of conformity (PDF)

Extra information

Area of use (lenses): 2C-1,2
Carrying help: Earpiece
Certification mark: C1585.1UG
Colour of frame: white/yellow
Equipment: with inclination
General product properties: corrected eye protection not possible
Lens typ: Lenses with filtering action
Marking on the frame: UG 166 F CE
Marking on the lens: 2C-1.2 UG 1 FT CE
Material lens: Polycarbonat
Mechanical resistence: F, T
Mechanical resistence (frame): F, T
Model: CSV, Etui, S UV 400, UNInofog
Norms EN (eye protection): EN 166, EN 170, EN 172
Notified body: NB 1883; ECS European Certification Service GmbH; Obere Bahnstraße 74; D-73431 Aalen
Product characteristics: Accessories, Spectacles
Product group: COMPLEXVISION
Product line: UNICOsport
Risk category (PPE Regulation): category II - Protective equipment to protect from danger
Size: universal
Surface treatment: Yes
Tint color: clear, grey

Application matrix

INFORMATION / IMPORTANT: The information provided serves only as a basis. UNICO Graber AG accepts no liability from third party recommendation on application and sale. All descriptions, data and illustrations in this printed matter are non-binding. We reserve the right to make changes for design or sales reasons.

CSV UV 400 **
Blow-out and blow-off work with compressed air
Precision mechanical work
Turning, milling and drilling work
Cutting, grinding with sparking
Wood and plastics processing
Laboratory work*
Construction work
Light sanding, fine-grained dust, small metal splinters
Heavy sanding, coarse-grained dust, metal splinters
* For protection against aggressive media, tightly fitting full-face goggles or a face shield should be used anyway
** Lens type for corrected eye protection UNICOindividual - recommendations may change due to coating.
optimal use
possible use
not recommended

Care and maintenance of unico graber safety spectacles

IMPORTANT: Do not use abrasives or chemicals for cleaning. Products that are too aggressive can damage the glass or its coating.

1. Remove the larger particles of dirt by running.
2. Apply some detergent, without balsam, on the glasses and rub it in gently with two fingers.
3. Rinse the detergent off by running it under luke-warm water.
4. Dab the glasses off with a soft cloth or paper towel.
5. Wipe the glasses, if necessary, with a microfiber cloth.

Some detergent and water is all you need to restore sharp vision

If you use the sleeves of your jumper or a handkerchief to clean the glass, you will leave fine scratches and traces of tiny dust particles and dirt on the glasses. These will “dull” the surfaces sooner or later. The microfiber cloths supplied with the glasses can be used for light cleaning purposes, however, if the glasses are very dirty, be sure to use fresh water.

Storing

When not in use, you should keep the safety spectacles in a suitable case, preferably a sturdy one. Never place the glasses down on the lenses. Avoid high fluctuations in temperature.